You’re sitting by the pool with your family, enjoying a summer day and cooling off in your inflatable pool. Suddenly, you notice a small hole in it. You can’t believe it; how could this happen? Then you remember that last week, you had a bunch of kids over for a pool party. Could one of them have poked or kicked the pool and caused a tear?
Holes in inflatable pools are not only frustrating but can also be dangerous if they are large enough to cause water to leak out quickly. If you find yourself having to patch up holes in an inflatable pool, this is the right article for you.
What Causes Leaks in Inflatable Pools?
The first thing you need to know about leaks in your inflatable pool is that they can be caused by a variety of things. The most common are:
The sun’s UV rays can also cause damage to your pool’s liner material over time. This results in cracks which lead to leaks and other problems down the road if left untreated. You must keep your inflatable pool out of direct sunlight as much as possible if you want it to last for years without any issues like this developing!
Air leaks occur when air seeps through the seams of your pool or a puncture on its surface. Air leaks can be caused by improper installation, but they’re usually caused by wear and tear on your pool’s fabric from repeated use or exposure to sunlight.
Water leaks often occur at the seams where two pieces of vinyl meet — which makes sense because this is where two pieces of vinyl come together and create an opening for water to seep through. Water can also leak out if there’s a hole in your liner or if the valve isn’t completely sealed shut while inflating your pool (which allows air out).
Most inflatable pools are made of PVC, which is not as strong as other materials like metal or fiberglass. This means that if you use your inflatable pool too much or overuse it, it will wear out faster than normal. Overuse can also lead to punctures and tears in your inflatable pool which can cause leaks.
Too much weight: Inflatable pools are designed to hold up a certain amount of weight before breaking down or leaking air. If you put too much weight on top of your inflatable pool, it could cause permanent damage to the material or even rip a hole in it.
How To Find A Hole In An Inflatable Pool？
Create A Soap Mixture
Creating a soap mixture is the first step when finding a hole in an inflatable pool. Soap is used to help show where the hole is.
The soap mixture should be about two parts water and one part liquid dish soap. This mixture should be mixed and poured into the hole. The soap will bubble up from the hole if there is air escaping from it. If no bubbles are seen, then there may not be a leak in that area and you can move on to another section of your pool.
Spread The Mixture Over Surface
After you create a soap mixture spread the mixture over the surface of the pool to find the hole. If it’s a small leak, it will show up as a bubble in your mixture. If it’s a larger leak, it could take many hours to find. In most cases, this method works very well and allows you to pinpoint exactly where the leak is coming from.
Mark The Area Of The Hole
It is important to mark the hole because it will be hard for you to find out where the hole is located in the pool. When you are done marking, you can start repairing the hole with a patch kit.
Now that you have marked where your home is located, it is time to repair it with a patch kit. You can buy this at any local hardware store or online at Amazon.com (get more information about the best pool patch kits here). Make sure that you get a hole patch kit that matches your pool size, especially if you have an above-ground pool or inground pool.
When using a patch kit, be sure to follow all instructions on how to apply it properly, or else it won’t work as intended. You can also watch videos on YouTube or read guides on how to fix small holes on your own so that you can save money and time!
Steps To Patch An Inflatable Pool
Step 1: Drain the Water
The first step is to drain the water from your inflatable pool. This can be done by removing the plug at the bottom of the pool and draining it into a bucket or other container. Be sure to remove all debris that might have fallen into the pool during use, as this could cause mold and mildew if left inside.
Step 2: Cut the Patch
Once you’ve drained all of the water from your inflatable pool, you’ll need to cut your patch to fit. The easiest way to do this is with a pair of scissors or utility knives. If you’re using a patch kit from an online retailer, then it should come with instructions on how to cut each specific type of patch. Simply follow these instructions and cut out a piece of material that covers any holes or rips in your inflatable pool.
Step 3: Dry and Clear the Patch Area
The third step is to pre-clean the area where you’ll be applying the patch. This will make the process easier, and help the patch bond better with your inflatable pool. The area around the hole needs to be dry before you apply the repair patch. If there are any moist areas or excessive dirt, clean them with a towel or brush.
Step 4: Inflate the Kiddie Pool
Inflating the inflatable pool can take some time, but it’s worth it when you’re ready to use your new pool. Make sure to inflate your kiddie pool with a pump designed for this purpose; do not use a bicycle pump or any other kind of pump that isn’t specifically designed for inflating an inflatable pool.
Step 5: Apply the glue
Use a paintbrush to apply glue over the entire surface of the patch in several strokes. The glue should come in contact with both surfaces of the inflatable pool.
Step 6: Attach your patch
Using a patch kit, you will need to cut the adhesive tape to the correct size and apply it to the leaking area of your inflatable pool. You must allow enough extra tape to overlap onto the surface of the pool by at least 2 inches.
Step 7: Let it dry
After attaching a patch to the inflatable pool, let it dry. You can use a hairdryer to speed up the process. Once it’s dry, you should see that your patch has been properly attached and is no longer leaking.
Can You Use Duct Tape To Patch An Inflatable Pool?
The simple answer is no. The reason is, that duct tape is not designed to be a permanent solution for anything. It is designed to seal off small openings, but it will not hold up over time. If you are looking for a permanent solution for your leaky pool, then you should consider hiring a professional who can find the source of the leak and fix it permanently.
If you have an inflatable pool that has a hole in it, then there are some temporary fixes that you can use to patch up the hole until you have time or money to hire someone else to repair it properly. These temporary fixes include:
Duct tape: This is one of the most common ways that people try to patch up their pool leaks. However, it’s important to note that this method isn’t very effective and won’t last very long either. If your pool has been punctured by something sharp like a tree branch or rock, then the best thing that you can do is toss out your patch and start again with something else because duct tape won’t work on these types of holes anyway.
Is there any other way to fix a hole in an inflatable pool?
There is no other way to fix a hole in an inflatable pool than using a patch.
Inflatable pool patches are the best way to repair a puncture or hole in your inflatable pool. They are made specifically for this purpose and they work great.
Knowing how to repair a leak in an inflatable pool should be a basic skill for everybody who owns one. Because the materials used to construct inflatable pools are vulnerable to cuts and perforations, leaks are almost always unavoidable.
Patching an inflatable pool is simple; all you need are the right equipment, some of which may be found around the house.
Finally, the majority of inflatable pools have patching kits. You can always buy one or DIY your way around the process if yours doesn’t have one.