Step by Step Guide: How to Make an Inflatable Pool at Home
|

Step by Step Guide: How to Make an Inflatable Pool at Home

The inflatable swimming pools are highly popular among the people who are living in the areas where the weather is too hot throughout the year. The inflatable pools can be used for various purposes and these are not only meant for the swimming purpose. There are many people who use these pools to have a party with their friends, family members, and relatives. There are many advantages which can be availed by installing an inflatable pool at your home.

The first advantage of the inflatable pool is that you do not need to spend much money on it. You should not worry about the pricey plumbing, electricity, and other things when you are installing this pool. You can easily install this pool at any place where you want. The installation of this pool does not take much time and you will get it installed within a few hours only.

So, if you want to install an inflatable pool at your home then you should buy it from a reputed company so that you can get warranties on it. The installation charges may also differ from one company to another so make sure that you choose an affordable company for this purpose.

Step 1: Buy an inflatable pool

Step 1: Buy an inflatable pool
Portrait of a boy in a swimming pool and parents drinking drink

Your first step is to buy an inflatable pool. This is absolutely the most important part of the process, so you’ll want to invest accordingly. Depending on your budget and how much use you think you’ll get out of it, spend at least $30 for a kiddie pool or twice that for a large inflatable model.

You should also pay attention to the size of your purchase; the bigger it is, the more water it will hold and therefore the more people or activities can be accommodated. If space is an issue (for example you have a small backyard or live in an apartment with a balcony), there are plenty of options designed especially for these situations.

Step 2: Layout your pool

Step 2: Layout your pool
Two cute children having fun in the inflatable swimming pool.

Naturally, the next step is to lay out your pool in a grassy area. Make sure there are no sharp objects that could puncture the sides of the pool and make it useless, then make sure it is level (you don’t want any tipping accidents), in the sun (or at least shaded if you live in a very hot climate like we do), out of the wind, and away from trees or other things that could cause damage.

The pool should be large enough to hold all of your family members with room to move around. This will ensure that everyone gets plenty of sunshine during their time in the pool.

Step 3: Attach the air pump and inflate it

Step 3: Attach the air pump and inflate it
Close-up view of woman inflating inflatable pool for children using an electric pump.

Inflate the pool! After you have installed the air pump, it’s time to plug it in. Once you have plugged it in, make sure that the attachment between the hose and the pool is secure. You don’t want to lose any precious air to a pesky leak!

As you are inflating your pool, be on the lookout for any leaks or problems with your pump. It is better to catch a problem early than let it go until the pool is fully inflated and discover you will need to restart from scratch.

Once your inflatable pool is fully inflated, remove the air pump and enjoy!

Step 4: Fill the pool with water

Step 4: Fill the pool with water
A boy is standing in an inflatable pool putting on diving

The next step is to fill up your pool. For most people, using a hose will be the quickest way to do this. However, if you do not have a hose that is long enough or if you live in an area where water is scarce, it might be better to use buckets to fill your pool. Either way, this step takes about 15 minutes and should be done with the pool in its final location (so don’t wait until the end of the process).

If you’re wondering how long it will take to fill your pool, there’s a quick and easy way to figure that out: 1 gallon = 8 pounds and 1 cubic foot = 7.5 gallons. This means that each cubic foot of water weighs about 60 pounds. Knowing this can help you calculate how long it will take as well as estimate how much water your pool holds (for example, my 10-foot pool gets filled with 54 cubic feet of water).

Step 5: Remove the plug in the bottom of the pool

Step 5: Remove the plug in the bottom of the pool
Swimming Pool, Inflatable Swimming Pool, Installing, Front or Back

Next, it’s time to drain the pool. First, find the plug at the bottom of your pool and remove it by pulling on it until it comes out. Be sure not to lose this part. It will be a good idea to keep all of the parts in their original packaging for easy reference later on.

Before you pull out the plug, make sure you have a plan in place for where to store your now-empty pool flotation device once you’ve finished draining it into your sink or bathtub.

Step 6: Take a break and have fun

Step 6: Take a break and have fun
Family in the swimming pool

When you’re done, grab a drink, relax and enjoy your accomplishment. Summer is short in many places, so soak up the sun while it lasts. Invite friends over to celebrate your pool—and if they ask how you made it, tell them they can learn how to make their own at BobVila.com!

Create your own inflatable pool!

  • Make sure you have enough space.
  • Make sure the pool is not on uneven ground.
  • Make sure the pool is not near any sharp objects.
  • Make sure the pool is not near any power lines or trees.
  • Make sure the pool is not near any fire hazards.

If you need a portable, easy-to-set-up pool for your party guests to cool off in, or just want a way to turn your kids’ backyard into the perfect splash pad, this is the guide for you. We’ve assembled all the information you need to know about inflatable pools so that your backyard will get just a bit more fun.

Similar Posts

Leave a Reply

Your email address will not be published.